Small, portable chip and dust extractor for small workshops
A chip and coarse dust extractor for extracting from saws, planers, spindle moulders, band-saws and similar machines in a small workshop. Equipped with two cloth bags, the top one acting as the filter and the lower one for collecting the waste. Power comes from a 750W induction motor equipped with a no-volt-release switch and emergency stop button. If required, the cloth collection bag can be replaced with plastic waste sacks, which can be more convenient for storage of waste prior to disposal.
An unusual feature of this extractor is the floor sweeping attachment which fits to the base of the machine, allowing the extractor to be wheeled around the workshop, collecting waste as it goes. There is a fine filter bag available for use when collecting medium sized dust particles, or alternatively, an optional fine dust cartridge filter can be fitted. (N.B.You must use plastic waste sacks with the fine filter bag or cartridge filter). The machine is supplied with approximately 600mm length of inlet hose; additional lengths of 100mm hose are available separately. This machine uses waste sack size – 560 x 915mm
AWEDE Filter Cartridge
Air filter cartridge for the AWEDE, chip extractors. Upgrade the performance of these extractors, able to handle fine saw dusts as well as chippings. Simply slots on with a stiff rubber seal.
- 850m3/hr air flow, 0.75kW 230V 1ph induction motor
- 100mm hose fits directly to many saws, planers, band-saws etc
- Wheeled base and grab handle for ease of movement
- An attachment provided to enable easy floor cleaning of wood chips
- Uses waste sack size – 560 x 915mm (340068)
|Bag Capacity||57 litres|
|Overall L X W X H||790 x 370 x 1,530mm|
|Particle Size||30 micron (10micron with cartridge filter)|